Skip to main content

Tripp Lite SmartPro Tower 1050SLT UPS

Part #: 2-10703509

Tripp Lite SmartPro Tower 1050SLT UPS

Part #: 2-10703509 MFG Part #: SMART1050SLT UPC #: 037332119902
$1,032.72 $623.09
Save $409.63
SPECIAL ORDER

0 Available

(as of May 9, 2026 2:27 AM) Refresh Inventory
FREE SHIPPING

Free shipping on most items when you spend $100

AUTHORIZED DEALER
AUTHORIZED DEALER
AUTHORIZED DEALER

AUTHORIZED DEALER

Protect your investment ()

About the Tripp Lite SmartPro

View User Manual

Protects Mission-Critical Equipment

  • Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
  • Audible alarm signals loss of utility power, low battery or overload
  • 8 NEMA 5-15R outlets
  • 6 ft. power cord with 120V NEMA 5-15P input
  • 690-joule surge suppression rating


Reliable Battery Backup

  • Supports half load up to 19 min. and full load up to 7 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs
  • Cold-start capability enables turn-on in battery mode during blackouts


Automatic Voltage Regulation (AVR)

  • Maintains selectable 100V, 110V or 120V nominal output over input range of 83V-145V without using battery power


EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance


LED Indicators

  • Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status


Network Management Cards

  • Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD


Communication Ports

  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert


Telephone/Network Jacks

  • Protect against power surges over telephone/DSL or network Ethernet lines

More from the Manufacturer

Protects Mission-Critical Equipment

  • Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks
  • Audible alarm signals loss of utility power, low battery or overload
  • 8 NEMA 5-15R outlets
  • 6 ft. power cord with 120V NEMA 5-15P input
  • 690-joule surge suppression rating


Reliable Battery Backup

  • Supports half load up to 19 min. and full load up to 7 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs
  • Cold-start capability enables turn-on in battery mode during blackouts


Automatic Voltage Regulation (AVR)

  • Maintains selectable 100V, 110V or 120V nominal output over input range of 83V-145V without using battery power


EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance


LED Indicators

  • Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status


Network Management Cards

  • Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD


Communication Ports

  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert


Telephone/Network Jacks

  • Protect against power surges over telephone/DSL or network Ethernet lines

More from the Manufacturer

Technical Specifications of the Tripp Lite SmartPro

General Information


Manufacturer Eaton Corporation
Manufacturer Part Number SMART1050SLT
Manufacturer Website Address http://www.eaton.com
Brand Name Tripp Lite series
Product Line SmartPro
Product Name SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
Product Type Line-interactive UPS

Technical Information


Plug / Connector Type NEMA 5-15P
Receptacle Type NEMA 5-15R
Receptacle Detail 8 x NEMA 5-15R
Cord Length 6 ft

Power Description


Load Capacity (VA) 1050 VA
Load Capacity (Watt) 650 W
Input Voltage 110 V AC120 V AC100 V AC
Output Voltage 120 V AC100 V AC110 V AC
Waveform Type Sine Wave

Management


Network Management SNMP Manageable
Alarm On BatteryOverload

Controls/Indicators


Status Indicators Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.

Interfaces/Ports


USB Yes
Total Number of Expansion Slots 1

Battery Information


Battery Chemistry Lead Acid
Backup / Run Time (Full Load) 7 Minute
Backup / Run Time (Half Load) 19 Minute
Battery Life 6 Year
Typical Battery Recharge Time 4 Hour
Hot Swappable Yes

Environmental Conditions


Maximum Operating Temperature 104°F (40°C)

Physical Characteristics


Height 10.20"
Width 6.80"
Depth 13.20"
Form Factor Tower
Weight (Approximate) 43 lb

Miscellaneous


Package Contents
  • SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
  • USB cable
  • DB9 cable
  • PowerAlert software
  • Owner's manual
Additional Information
  • SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
  • 1050VA / 650 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
  • Large internal batteries offer runtimes of 19 minutes at half load (525VA / 325 watts) and 7 minutes at full load (1050VA / 650 watts)
  • Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V
  • Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
  • Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
  • 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality
  • Hot-swappable batteries allow on-site battery replacement without powering off connected equipment
  • UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed
  • 2 year warranty with up to $250,000 connected equipment insurance
Certifications & Standards UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin China

Warranty


Limited Warranty 2 Year

Ratings and Reviews

Do you own the Tripp Lite SmartPro?
Be the first to write a review!
Displaying 1-10 of 70
Page size: