The HPE Networking Comware Switch Series 5150 HI is a family of stackable L3 access switches powered by HPE Comware 9 delivering scalability and resiliency for medium and large enterprise campus networks.
With 24 and 48 MACsec-256 enabled 1 GbE downlink ports, 6x10/25 GbE uplinks, hot swappable dual power and fans, and up to 90 watts of 802.3bt PoE per port, this flexible series delivers security and performance for your clients, servers, and IoT devices. Intelligent Resilient Fabric (IRF) stacking up to 9 members adds scale and high availability while Intelligent Network Quality Analyzer (iNQA) supports real-time visibility into network health and performance.
Network visibility, management, and operation tools for this series include standard CLI and the Smart Management Center (SmartMC), embedded and ready to use at no additional cost. The series integrates with HPE Aruba Networking IMC, delivering a centralized point of control for your entire network.|
What's new
- Improved performance and scale: supports up to 396 Gpbs bandwidth, 9 member switch stacking, 32K MAC table, improved ARP, ACL, IPv4/v6 unicast and multicast scale.
- High availability: Hot swappable dual power supplies and dual fans, mLAG for link level aggregation and redundancy.
- 6 built-in 10/25 G uplink ports offers competitive platform TCO. · Comprehensive L3 routing and MPLS features, IPv4/v6 support, L3 multicast support.
- Enhanced security: Trusted Platform Module (TPM) and secure boot, support industry-standard MACsec 256 encryption for end-to-end data link layer security on all ports.
- Standard CLI and Smart Management Center (SmartMC) embedded and ready to use, delivering network visibility, management, and operations at no additional cost. |
Features
Scalable L3 Access Switches
The HPE Networking Comware Switch Series 5150 HI delivers scalability and enhances reliability of the network with Intelligent Resilient Framework (IRF) technology. IRF stacking enables virtual resilient switching fabrics for simpler, flatter, and more agile networks.
Supports 10 GbE uplinks, static and RIP routing, PoE+, ACLs, and IPv6 for improved and costeffective network performance.
DRNI enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device.
iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss, and byte loss rate.
Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch, delivering up to 90W of 802.3bt standards compliant power for cameras, phones, and wireless access points.
Performance with Quality of Service (QoS)
The HPE Networking Comware Switch Series 5150 HI is engineered with nonblocking architecture for low-latency switching. It supports advanced classifierbased Quality of Service (QoS) to group traffic, set priority levels, and rate limit selected traffic on a port, VLAN, or entire switch.
The HPE Networking Comware Switch Series 5150 HI is a family of stackable L3 access switches powered by HPE Comware 9 delivering scalability and resiliency for medium and large enterprise campus networks.
With 24 and 48 MACsec-256 enabled 1 GbE downlink ports, 6x10/25 GbE uplinks, hot swappable dual power and fans, and up to 90 watts of 802.3bt PoE per port, this flexible series delivers security and performance for your clients, servers, and IoT devices. Intelligent Resilient Fabric (IRF) stacking up to 9 members adds scale and high availability while Intelligent Network Quality Analyzer (iNQA) supports real-time visibility into network health and performance.
Network visibility, management, and operation tools for this series include standard CLI and the Smart Management Center (SmartMC), embedded and ready to use at no additional cost. The series integrates with HPE Aruba Networking IMC, delivering a centralized point of control for your entire network.|
What's new
- Improved performance and scale: supports up to 396 Gpbs bandwidth, 9 member switch stacking, 32K MAC table, improved ARP, ACL, IPv4/v6 unicast and multicast scale.
- High availability: Hot swappable dual power supplies and dual fans, mLAG for link level aggregation and redundancy.
- 6 built-in 10/25 G uplink ports offers competitive platform TCO. · Comprehensive L3 routing and MPLS features, IPv4/v6 support, L3 multicast support.
- Enhanced security: Trusted Platform Module (TPM) and secure boot, support industry-standard MACsec 256 encryption for end-to-end data link layer security on all ports.
- Standard CLI and Smart Management Center (SmartMC) embedded and ready to use, delivering network visibility, management, and operations at no additional cost. |
Features
Scalable L3 Access Switches
The HPE Networking Comware Switch Series 5150 HI delivers scalability and enhances reliability of the network with Intelligent Resilient Framework (IRF) technology. IRF stacking enables virtual resilient switching fabrics for simpler, flatter, and more agile networks.
Supports 10 GbE uplinks, static and RIP routing, PoE+, ACLs, and IPv6 for improved and costeffective network performance.
DRNI enables link aggregation from multiple switches to implement device-level link backup for node redundancy. DRNI also simplifies network topology by virtualizing two physical devices into a logical device.
iNQA helps in measuring network packet loss performance, forward, reverse, and two-way packet loss, including lost number of messages and bytes, message loss, and byte loss rate.
Dual, redundant, hot-swappable power supplies maintain a dynamic and highly available network switch, delivering up to 90W of 802.3bt standards compliant power for cameras, phones, and wireless access points.
Performance with Quality of Service (QoS)
The HPE Networking Comware Switch Series 5150 HI is engineered with nonblocking architecture for low-latency switching. It supports advanced classifierbased Quality of Service (QoS) to group traffic, set priority levels, and rate limit selected traffic on a port, VLAN, or entire switch.